1RU FIBER PANEL

1RU FIBER PANEL RM PUTTY EMPTY

$85 NEW OEM *
FPA000000PSPart Number: FPA000000PS*

This Rack Mount 1RU Fiber Panel with 3 termination panel capacity, removable top, and slide out master panel tray includes the following:

  • Universal mounting hardware for 19″ or 23″ mounting.
  • Slide out tray designed to support storage of splice trays.
  • Can be ordered fully terminated with cabling or pigtails.
  • Removable top for ease of access.

*Shown loaded with SC adapter panels and 1M Pigtail. 


8 PACK SM SCU SIMPLEX ADAPTER PANEL PUTTY

$17 NEW OEM

FP08PSMSCU1P Part #FP08PSMSCU1P*

 The FP08PSMSCU1P is an 8-pack adapter plug-in featuring singlemode SC adapters.  These adapters panels can be ordered with all standard types of adapters and connectors.

*FP08PSMLCU1P 8-pack SC adapter panel also available from stock at $18 each.


  12-FIBER SINGLE SPLICE TRAY PUTTY

$15 NEW OEM

FPSPLCTRAY01P  Part #FPSPLCTRAY01P

 This 12-position splice tray expands fiber splice capabilities and provides the splicing location for the fiber optic cables.


 1M SCU-STUB 9/125um SM 12-FIBER PIGTAIL 3mm

$28.95 NEW OEM

T3SCUXXXSM012001MPart #T3-SCU-XXX-SM-012-001M

Posted in Promotions | Tagged , , , , | Leave a comment

FIBER OPTIC SPLITTERS

WHAT IS A FIBER OPTIC SPLITTER?

A fiber splitter is a passive component device that takes a single fiber signal and divides it into multiple signals, much like a coax cable transmission system.  The Optical Splitter is a tandem device with multiple input or output terminals.

WHAT IS A FIBER SPLITTER USED FOR?

A fiber optic splitter is used to distribute or combine optical signals in various applications, especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH etc.) to connect the MDF and the terminal equipment.

HOW DOES A FIBER SPLITTER WORK?

Fiber splitter allows a single PON network interface to be shared among many subscribers without the use of electronics or power. Their key parameters include the optical loss, splitting ratio, isolation and PDL.

splitter workings
WHAT ARE THE AVAILABLE TYPES OF SPLITTERS?

PLC (Planar Lightwave Circuit) and FBT (Fused Biconic Tapered) are the two basic technologies for building PON splitters.

PLC SPLITTERS

PLC splitters offer a better solution for applications where larger split configurations are required.  To achieve this, waveguides are fabricated using lithography onto a silica glass substrate, which allows for routing specific percentages of light.  As a result, PLC splitters offer accurate and even splits with minimal loss in an efficient package.

FBT SPLITTERS

FBT is the traditional technology in which two fibers are placed closely together and fused together by applying heat while the assembly is being elongated and tapered. FBT splitters are widely accepted and used in passive networks, especially for instances where the split configuration is smaller (1×2, 1×4, etc).

Posted in Uncategorized | Leave a comment

Newton Instruments Channel Partner

To Our Valued Customers:

Just a reminder, TelExpress is a preferred long standing Channel Partner with Newton Instruments.  Please remember to call me if you have any racking and hardware requirements or a need for cable management.  We want to make sure you take advantage of the best industry pricing by coming to us direct as a top level partner and benefiting from our discounts.

Newton Partners

Newton Instrument Company utilizes a nationwide network of Channel Partners who can add value to your purchase of Newton products by:

  • Utilizing their volume purchase position to provide additional savings to you
  • By purchasing and stocking locally your Channel Partner can:
  • Reduce overall lead times
  • Reduce incurred freight charges and in some cases allow customer pick up
  • Consolidation of multiple requests from multiple manufacturers, providing a “one stop shop” experience
  • Specializing in providing the end-user with a complete product solution and application
  • Establish more favorable credit terms based on your overall purchase

Feel free to call 1-800-876-4101 for more information, or send your immediate requests for a price quote today to sales@telexpressinc.com.

Posted in Promotions | Leave a comment

Custom “Industry Standard” DSX Panels


FEATURED PRODUCTS


84 Termination Custom Low Profile DSX-1 Panel

$225 NEW IN THE BOX *


Part Number: DSXLPFX84

This low-profile front cross connect 23″ 1-84 DSX-1 panel delivers the cross-connect capabilities you need in a compact footprint to save space. All configurations are just 4 inches in height to maximize space.

*While Supplies Last



56-Termination Custom DSX-1 Panel

$200 NEW IN THE BOX *



Part Number: DS156FB19

The 56-termination front below cross-connect panel with bantam jacks includes four 1-inch x 4-inch (2.5 cm x 10.2 cm) vertical jumper rings, a horizontal cable tray, two horizontal cable bars, red LEDs, and a designation label numbered 1-28A and 1-28B. The panel can be mounted flush in a 19- or 23-inch rack.


*While Supplies Last


Contact your account manager at 1.800.876.4101 or email us at sales@telexpressinc.com

Posted in Promotions | Leave a comment

TELEXPRESS GOES GREEN WITH SOLAR POWER

ARCHDALE, NC (1-16-13) – TelExpress, Inc. recently completed construction on two photovoltaic solar energy systems at their Archdale, NC facility.  Combined electric power generated is 80 kilowatts (kW).  The rooftop installations are comprised of 340 solar panels which will utilize 6,792 square feet of otherwise unused roof space.  On one building, solar panels are mounted to the flat TPO membrane roof using a non-penetrating ballast mount system. At the corporate headquarters, panels are mechanically attached to the pitched corrugated metal roof.  These installations will cover 95% and 48% of the power used by each building respectively.  During the 25 year life of the installations, 1,966 tons of carbon dioxide emissions will be saved, significantly reducing the company’s carbon footprint.

Posted in Uncategorized | Leave a comment

Cell on Wheels (COWS)

TelExpress offers the sale and rental of Cell on Wheels (COWS) Mobile Towers. This is a cost effective portable solution which can be rapidly deployed at a mobile site in less than two hours.

COWS consist of a mini telecom tower that is folded with the antenna and mounted behind a truck. Sometimes, the truck also houses a generator set to provide power to the equipment.

These provide increased signal strength in areas where network maintenance is being done and are used for temporary situations such as special events, major sporting events, or disaster areas.

Our solutions can be configured for cellular and WiFi deployment.

Call one of our TelExpress Sales Professionals today to discuss a customized solution for your project.

800-876-4101 or sales@telexpressinc.com

Cell on Wheels

Posted in Uncategorized | Leave a comment

Cancer Awareness Month

TelExpress CEO Sherry Clinard participated in a Fund Raiser this past weekend for MIA (Mammograms in Action).  The Event was called Barbells for Boobs and was held at Sherry’s local Crossfit gym (College Hill Crossfit).  This event was a competition which included two of crossfit’s women named workouts combined, “Helen meets Grace”, and the event raised over $2700 dollars.  The money helps the fight against Breast Cancer by providing additional funding for mammogram screenings for those who do not qualify for government funding, are unable to afford the service, or don’t meet current age requirements for screening.

Posted in Uncategorized | Leave a comment

Bark for Life

TelExpress employee Susan Smith participated this past weekend in the Bark for Life, a Canine Event to Fight Cancer.  This is part of the American Cancer Society’s Relay for Life Fundrasing events.  The entire event, held in Davidson County, raised over $10,900 dollars to help find cancer cures dogs.  The event also gives canine cancer survivors a chance to get out and play with others!  Susan walked in the event with her husband Richard, and their recently adopted dog  Buddy, who is a beautiful Great Pyrenees.

Posted in Uncategorized | Leave a comment

We are now a Multilink Distributor!

 

TelExpress, Inc. is pleased to announce the addition of Multilink to our line of new OEM products. As a stocking distributor of Multilink, you can count on us to offer you the best prices and the highest quality parts in the industry.
We continue to add to our already extension selection of Multilink products stocked in our NC warehouse.

We hope to be your #1 source!

Multilink is an engineering and  product development based manufacturer of telecommunications network components, servicing the traditional CATV MSO’s (Cable Television Multiple System Operators), CLEC’s (Competitive Local Exchange Carriers), RBOC’s (Regional Bell Operating Companies), Independent Telco’s, Regulated Utilities, and LAN (Local Area Network) providers and end users.
  • Access Flooring
  • AM Series JIC Junction Boxes
  • CATV Products
  • Fiber Distribution
  • Indoor/ Outdoor Enclosures
  • MDU Enclosures
  • MSO Business Services
  • Outside Plant
  • Power
  • Raceway Molding
  • Traffic Control Solutions
Posted in Uncategorized | Leave a comment

PAT750CLI Burndy on Sale!

PAT750CLI – Patriot 12 TON Li-ion 120V Crimping Tool on Sale now!

$3795.00 while supplies last!

Click HERE!

Posted in Uncategorized | Leave a comment